TIE-HVR-195VB - SURFACE-MOUNTED RUBBLE (ASHLAR) STONE ANCHOR SYSTEM

Adjustable Anchor System for Rubble (Ashlar) Stone designed for concrete or metal stud backup walls.

• In this anchor system, the L-shaped bracket is attached to the backup
• The mason then places the vertical rod into the projecting oblong eyelet as shown (after inserting it into the hole of the flexible wire tie)
• Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
• Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
• TIE-HVR-195VB is an Adjustable Anchor System

DIMENSIONS/GAUGES:

• L-shaped bracket is 12 gauge thick x 2-5/8" wide, available in leg lengths to accommodate from 0" through 3-1/2" insulation
• Vertical Hook is available in 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available on request.)
• Flexible Wire Ties are standard 3/16" dia. x length to suit

AVAILABLE FINISHES:

• Hot Dip Galvanized
• Stainless Steel

NOTES:

• System shown with metal stud backup wall. For other applications, see Tie-HVR-190 Anchor System, Tie-HVR-195V (or Tie-HVR-295V Ladder Type) or contact an H & B Technical Representative.
• U.S. Patent No. 8,375,667